Ask five people how big 1 Marla is and you may hear two different answers. Both can be right. In most Lahore housing societies, 1 Marla is 225 square feet. In older land records and many other Punjab districts, it is 272.25 square feet.

That gap is about 21%, which is a lot of land when you are paying by the Marla. This guide explains 1 Marla in square feet under both standards, shows a full conversion table, and tells you how to check which one your plot uses.

The Two Marla Standards in Pakistan

The modern standard: 225 square feet. One Marla equals 225 square feet, or 25 square yards. LDA-approved schemes, DHA, Bahria Town and most modern Lahore societies use it. A 5 Marla plot under this standard is 1,125 square feet, usually laid out as 25 by 45 feet.

The older standard: 272.25 square feet. One Marla equals 272.25 square feet, or 30.25 square yards. This comes from the old revenue system and still appears in fard records, rural deeds, older city areas and many cities outside Lahore. A 5 Marla plot under this standard is 1,361.25 square feet.

Neither standard is “wrong”. What matters is that you know which one applies before you compare prices.

Marla to Square Feet Conversion Table

Plot sizeAt 225 sq ft per MarlaAt 272.25 sq ft per Marla
1 Marla225 sq ft (25 sq yd)272.25 sq ft (30.25 sq yd)
2.5 Marla562.5 sq ft680.6 sq ft
3 Marla675 sq ft816.75 sq ft
5 Marla1,125 sq ft1,361.25 sq ft
8 Marla1,800 sq ft2,178 sq ft
10 Marla2,250 sq ft2,722.5 sq ft
1 Kanal (20 Marla)4,500 sq ft5,445 sq ft

For quick checks, you can also use Zameen’s area unit converter. Just make sure it is set to the Marla size your society uses.

Measuring an empty plot in square feet to confirm its marla size

A Real Example: Lahore vs Faisalabad Plots

Our own listings show why this matters. In Lahore, most modern societies use the 225 square feet Marla, so when you look at our 2.5 Marla and 3 Marla residential plots in Eden Abad, ask for the exact dimensions and run the quick check in the steps below.

In Faisalabad, the plots at Eden Villas on Risalawala Road are measured differently. A 5 Marla plot there is 27 by 50 feet, which is 1,350 square feet, and a 10 Marla plot is 36 by 75 feet, or 2,700 square feet. Both work out close to 270 square feet per Marla, in line with the larger standard. You can see them on our Faisalabad plots page.

So a “5 Marla” plot in Faisalabad gives you about 225 more square feet of land than a “5 Marla” plot in a Lahore society that uses 225 square feet per Marla. Comparing the two on price per Marla alone would mislead you.

Why the Marla Size Matters to Buyers

  • Price comparison. Always compare price per square foot, not only price per Marla, when plots come from different areas or schemes.
  • Construction budget. Builders quote per square foot of covered area, so the true plot size changes what you can build. Our guide to construction cost in Lahore 2026 shows how covered area drives the budget.
  • Building rules. Setbacks and covered area limits are set on actual dimensions, so a slightly bigger plot can allow a bigger house.
  • Documents. If the fard or allotment letter uses one standard and the sale agreement another, the mismatch can cause disputes at transfer.

How to Check Which Marla Your Plot Uses

  1. Read the plot dimensions on the allotment letter or society map, then multiply length by width.
  2. Divide the result by the number of Marla stated. A result near 225 means the modern standard; near 272 means the older one.
  3. Ask the society office which standard its approved layout plan uses.
  4. For land outside a scheme, check how the area is recorded in the fard.
  5. Make sure the sale agreement states both the Marla size and the dimensions in feet.

If you are buying a 5 Marla plot specifically, our 5 Marla plots in Lahore guide covers prices and payment plans.

Frequently Asked Questions

How many square feet are in 1 Marla in Lahore?

In most Lahore housing societies, 1 Marla is 225 square feet. Older records and some older areas use 272.25 square feet.

How many square feet are in 5 Marla?

1,125 square feet at 225 per Marla, or 1,361.25 square feet at 272.25 per Marla.

How many Marla are in 1 Kanal?

Twenty. That makes 1 Kanal 4,500 square feet at 225 per Marla, or 5,445 square feet at 272.25 per Marla.

How many square yards are in 1 Marla?

25 square yards under the modern standard and 30.25 square yards under the older one.

Talk to Royal Properties

Not sure how big a plot really is? Share the dimensions with our team and we will confirm the exact area before you pay anything. Call +92-322-9999169 or contact us online.